PCIe Gen 4 16GT/s Gen-Z (SFF-8639) to M.2 NVMe Adapter

PCIe Gen 4 16GT/s Gen-Z(SFF-8639) to M.2 NVMe Adapter. With wake# and CLKREQ# signals, they are from M.2 to U.2. 

The adapter supports SMBus Hot plug, repeater buffer, voltage level shift and isolated input and output SMBUS signals with 64K SMBUS

EEPROM.

Features :

• M.2 NVMe to U.3(SFF-8639) convert 
• Built-in SFF-8639, 30u” connector, pin-out defined by SFF-9402 Rev1.1
• PWM 12V to 3.3V synchronous buck converter Power for M.2 NVMe SSD
• • 5.5A maximum output current
  •  Output Discharge Control
  •  The output overcurrent protection(OCP) 
  •  Uundervoltage lock out protection(UVLO) monitor
  •  Over/Under Voltage Protection 
  •  Thermal shutdown protection
  •  ESD HBM (Human Body Mode)/500V 
• Built-in 3.3V Hot Plug Power with eFuse protection for M.2 NVMe SSD
• •  Programmable Current Limit: 6.5A 
  •  Programmable Inrush Current Slew Rate
  •  Thermal shutdown protection and fault alert
  •  Back-to-Back (B2B) FET Operation
• Built-in 3.3V input with 400W TVS(TRANSIENT VOLTAGE SUPPRESSOR) ESD protection 
• Built-in 3.3V output with 30-V, N channel NexFET power MOSFET, 32 m ohm
• Built-in 3.3V output with SCHOTTKY BARRIER Power Rectifier
• Supports M.2 3.3V&1.8V supply
• Supports M.2 VIO_CFG Signal
• Supports M.2 PERST# Signal 3.3V and 1.8V Voltage-Level Translator
• Supports M.2 CLKREQ# Signal 3.3V and 1.8V Switching Translator
• Supports M.2 WAKE# Signal 3.3V and 1.8V Translator
• Supports PWRDIS Signal from U.3 pin to M.2 pin 
• Supports M.2 /1.8V to U.3/3.3V SMBCLK, SMBDATA Level Shift
• Supports M.2 /1.8V to U.3 /3.3V SMBCLK, SMBDATA isolated, repeater
• Supports M.2 /1.8V to U.3 /3.3V SMBCLK, SMBDATA Hot-Swap
• Built-in SMBus EEPROM 64KB
• LED1 RED Blinking indicates M.2 active status
• LED2 GREEN ON indicates 3.3V power ready
• LED3 GREEN ON indicates 1.8V power read

Specifications :

• Compliant with NVM Express 1.3a
• Support PCI Express Base Specification Rev 4.0 
• Support SSD_Form_Factor_Version1_a
• Compliant with PCI Express M.2 Specification Version 1.2
• Compliant with PCIe SFF-8639 Module Specification Rev 3.0
• Compliant with SFF-TA-1001 Rev1.1

Supports the following form factor M.2(NGFF) SSD

• Type 2242-D2-B-M: 42mm(L) x 22mm(W)
• Type 2260-D2-B-M: 60mm(L) x 22mm(W)
• Type 2280-D2-B-M: 80mm(L) x 22mm(W)

Micro SATA Cables PN # GENZ-1666-M