U.3 (SFF-8639) PCIe Gen 4 16GT/s to M.2 NVMe SSD Adapter
PCIe Gen4 U.3 to M.2 Adapter
Gen-Z(SFF-8639) PCIe Gen4,16GT/s to M.2 NVMe SSD Adapter
Unit can be used with Micro SATA Cables Part#OCU-1690-GEN4
PCIE GEN4 X4 Slot to Oculink Passive Adapter
Unit can be used with Micro SATA Cables PN # OCU-1735-U3
PCIe Gen 4 OCulink (SFF-8611) to U.3 (SFF-8639) Cable 150cm
U.3 (SFF-8639) PCIe Gen4,16GT/s to M.2 NVMe SSD Adapter
With wake# and CLKREQ# signals, they are from M.2 to U.2
The adapter supports SMBus Hot plug, repeater buffer, voltage level shift and isolated input and output SMBUS signals with 64K SMBUS
EEPROM.
Features :
- M.2 NVMe to U.3(SFF-8639) convert
- Built-in SFF-8639, 30u” connector, pin-out defined by SFF-9402 Rev1.1
- PWM 12V to 3.3V synchronous buck converter Power for M.2 NVMe SSD
-
- 5.5A maximum output current
- Output Discharge Control
- The output overcurrent protection(OCP)
- Uundervoltage lock out protection(UVLO) monitor
- Over/Under Voltage Protection
- Thermal shutdown protection
- ESD HBM (Human Body Mode)/500V
- Built-in 3.3V Hot Plug Power with eFuse protection for M.2 NVMe SSD
-
- Programmable Current Limit: 6.5A
- Programmable Inrush Current Slew Rate
- Thermal shutdown protection and fault alert
- Back-to-Back (B2B) FET Operation
- LED1 RED Blinking indicates M.2 active status
- LED2 GREEN ON indicates 3.3V power ready
- LED3 GREEN ON indicates 1.8V power read
Specifications :
- Compliant with NVM Express 1.3a
- Support PCI Express Base Specification Rev 4.0
- Support SSD_Form_Factor_Version1_a
- Compliant with PCI Express M.2 Specification Version 1.2
- Compliant with PCIe SFF-8639 Module Specification Rev 3.0
- Compliant with SFF-TA-1001 Rev1.1
Supports the following form factor M.2(NGFF) SSD:
- Type 2242-D2-B-M: 42mm(L) x 22mm(W)
- Type 2260-D2-B-M: 60mm(L) x 22mm(W)
- Type 2280-D2-B-M: 80mm(L) x 22mm(W)
Micro SATA Cables PN # U3-1694-M2
Unit can be used with Micro SATA Cables Part#OCU-1690-GEN4
PCIE GEN4 X4 Slot to Oculink Passive Adapter
Unit can be used with Micro SATA Cables PN # OCU-1735-U3
PCIe Gen 4 OCulink (SFF-8611) to U.3 (SFF-8639) Cable 150cm
SKU | U3-1694-M2 |
---|---|
Bar Code (UPC) | 646791004539 |
Specifications | U.3 (SFF-8639) PCIe Gen4,16GT/s to M.2 NVMe SSD Adapter With wake# and CLKREQ# signals, they are from M.2 to U.2 The adapter supports SMBus Hot plug, repeater buffer, voltage level shift and isolated input and output SMBUS signals with 64K SMBUS EEPROM. Features :
Specifications :
Supports the following form factor M.2(NGFF) SSD:
Micro SATA Cables PN # U3-1694-M2 Unit can be used with Micro SATA Cables Part#OCU-1690-GEN4 PCIE GEN4 X4 Slot to Oculink Passive Adapter Unit can be used with Micro SATA Cables PN # OCU-1735-U3 PCIe Gen 4 OCulink (SFF-8611) to U.3 (SFF-8639) Cable 150cm |
We are proud to offer an everyday volume discount program. Simply enter the Promo Code: VOLUME in the Cart to receive the following savings.
Save when you spend:
- Spend $300.00+, save 5% on your order
- Spend $500 or more and save 10% on your order
- Enjoy Free Shipping on all domestic US orders over $500
- Discounts will be applied with entry of Promo Code "VOLUME" in the Discount Codes section of the shopping cart
- Discounts may not be used with other promotions
- Discounts are based on order subtotals (before tax & shipping)
- Discounts are on the current total order amount only