MSATA Adapters

RAID card offers SATA 3 interface, built-in 2-port SATA 7-pin connector, can be combined two SATA SSD into RAID 0, RAID 1, JBOD mode.

USB 3.1 Micro B and SATA III to mSATA and M.2 SSD Adapter 

SATA III to mSATA & M.2 SSD & CFast Card Adapter‌

The unit provides 2-port Mini PCI-e SSD connector, built-in 2.5-inch shell SATA II high-performance array card. It provides hardware to setup the RAID level, no driver, BIOS or software required for RAID installation, can be switched to RAID 0, RAID 1, JBOD three mode operation settings. 

This is an Adapter with 3.5” Bracket SATA to mSATA adapter it provides a set of standard 7 +15 pin SATA connector and a an additional 7pin SATA signal connector on the host connection, and two sets of Mini PCI-e 52pin connector on the mSATA connection.

The SATA III to mSATA Adapter with 2.5 Inch Housing is SATA III to mSATA adapter, providing one 7+15pin SATA connector on the host connection and one Mini PCI-e 52-pin connector on the SSD storage devices connection.  

The SATA III to mSATA Adapter with 2.5 Inch Housing adapter allows the installation of an mSATA SSD as system disk, boot the operating system directly without having to install any drivers, but does not affect the execution speed of the SSD storage devices.

This is an Adapter with 3.5” Bracket it is SATA to mSATA adapter, providing a set of standard 7 +15 pin SATA connector to a 7pin SATA signal connector on the host connection, and two sets of Mini PCI-e 52pin connector on the mSATA connection.

This is a USB 3.0 mini pci-e mSATA SSD Adapter card that can be used a USB 3.0 Drive.  It is for mSATA SSDs with the Intel pin out.

This unit is a SATA III to mSATA adapter, providing one 7+15pin SATA connector on the host connection and one Mini PCI-e 52-pin connector on the SSD storage devices connections.