SATA & eSATA Adapters

This is a SFF-8643 and SATA to M.2 SSD (PCIe/SATA) Adapter.

The 4-port SD to SATA adapter with 2.5” Housing is an economical 2.5" SSD. It uses a 2.5" ultra-lightweight aluminum material shell, coupled with the SD Card combination to SATA adapter. When assembled, it can operate in a variety of operating systems. Such as DOS, Windows 95, 98, XP, 2000, Vista,Win 7, Linux, Unix, and so on. The adapter allows the installation of SD Card as system disk, boot the operating system directly, without having to install any drivers.

‌eSATA HARD DRIVE TO USB 3.0 3 ft. Adapter Cable‌

The SATA III to mSATA Adapter with 2.5 Inch Housing is SATA III to mSATA adapter, providing one 7+15pin SATA connector on the host connection and one Mini PCI-e 52-pin connector on the SSD storage devices connection.  

The SATA III to mSATA Adapter with 2.5 Inch Housing adapter allows the installation of an mSATA SSD as system disk, boot the operating system directly without having to install any drivers, but does not affect the execution speed of the SSD storage devices.

RAID card offers SATA 3 interface, built-in 2-port SATA 7-pin connector, can be combined two SATA SSD into RAID 0, RAID 1, JBOD mode.

This is an Adapter with 3.5” Bracket it is SATA to mSATA adapter, providing a set of standard 7 +15 pin SATA connector to a 7pin SATA signal connector on the host connection, and two sets of Mini PCI-e 52pin connector on the mSATA connection.