PCIe x8 Gen 4 for Bifurcated U.2 NVME Dual Port AIC
The PCIe x8 Gen 4 for Bifurcated U.2 NVME Dual Port AIC is a high-performance interface card designed for use in server systems. The card features a PCIe x8 Gen 4 interface, which delivers high-speed data transfer rates of up to 16 GT/s. The card is also equipped with dual ports for U.2 NVME drives, allowing for high-speed data transfer rates between the system and the drives. The card is designed to be installed in a server system using an available PCIe slot, and is compatible with a wide range of operating systems, including Windows and Linux.
PCIe x8 Gen 4 for Bifurcated U.2 NVME Dual Port AIC
Features :
U.2 NVMe to PCI Express 4.0 convert
Built-in two U.2 SFF-8639 Females connector
The PCIe x8 Gen4 to U.2 SSD Dual Port AIC can be offered in two x4 data link width configurations (need CPU and BIOS both support) for dual port U.2 SSD.
Supports power input from PCIe CEM +12V or external PCIe 2x3 12V AUX Power
Supports Server BMC & IPMI management application
Built-in SMBus Switch(Address: 0x71) for U.2 SSD SMBus, Clock buffer SMBus communication
Supports PCIe REFCLK Buffer fan out(Address: 0xD8) for U.2 dual port, it shall be buffered and fanned out to the individaul U.2 SSD
Built-in SMBus I/O Expander(Address: 0x20) for Supports U.2 PWRDIS signals control
Supports PCIe PERST# for OOB(out of band) management to remote U.2 SSD Reset
Supports U.2 12V Power Rail for OOB(out of band) management to disable U.2 SSD Power
Built-in WAKE# Auto-Direction Sensing Between PCIe CEM and U.2 SSD
Built-in CLKREQ# Auto-Direction Sensing Between PCIe CEM and U.2 SSD
Built-in 12V Hot Plug Power controller with eFuse protection for each U.2 SSD
Programmable Current Limit: 6.5A
Programmable Inrush Current Slew Rate
Thermal shutdown protection and fault alert
Back-to-Back (B2B) FET Operation
Built-in 12V input with 400W TVS(TRANSIENT VOLTAGE SUPPRESSOR) ESD protection
Built-in 12V output with 30-V, N channel NexFET power MOSFET, 32 m ohm
Built-in 12V output with SCHOTTKY BARRIER Power Rectifier
LED1, LED3 Green LED Blinking indicates U.2 NVMe SSD access status
LED2, LED4 RED LED on indicates U.2 NVMe SSD power ready
Specifications :
PCI Express Base Specification Rev 4.0
PCIe_CEM_SPEC_R4_V1_0_08072019_NCB
Compliant with NVM Express 1.3
Support SSD_Form_Factor_Version1_a
Compliant with PCI Express SFF-8639 Module Specification Revision 4.0, Version 0.7
