Cables

‌Enabled 2 additional pin connections, E16(RSVD) & S15(RSVD2)

‌‌OCuLink SFF-8611 Right Angle Male to OCuLink SFF-8611 Female Straight 

Cable length : 25 CM

LP Strait 8i to Standard Strait 8i, 1m

This MCIO 4i 38 Pin to SlimSAS 4i Cable - 500MM 

The cable is a 500MM cable that connects MCIO 4i 38 Pin devices with SlimSAS 4i devices.

It is an ideal cable for connecting MCIO devices through the SlimSAS adapter at any point in the data center

The Oculink Male to Female Cable is a 50 cm (19.68 inches) long cable that connects devices with Oculink connectors. These connectors are compact, high-density connectors commonly used in server and storage systems for high-speed data transfer.

Designed to connect Oculink-enabled devices to motherboards or host systems.

Provides reliable and high-speed data transfer, with a maximum transfer rate of up to 32 Gbps.

Ideal for use in high-performance computing and storage applications.

The MCIO 74 Pin to 8 x SATA 7 Pin 60 CM Cable is a versatile and high-quality data transfer cable that allows you to efficiently connect up to 8 SATA devices to a server's MCIO 74 pin connector.

The Cable OcuLink 8i to 8x SATA – 50CM is a cable designed to connect devices with OcuLink 8i connectors to SATA drives. It enables data transfer between these devices, typically used in storage configurations where multiple SATA drives need to be connected to a controller or motherboard equipped with OcuLink 8i ports. The cable is 50 centimeters in length, providing flexibility in setup and ensuring reliable connectivity between components.

OCuLink 8i to 8x SATA – 50CM‌

SFF-8644 to SFF-8470 1 Meter Cable

External Mini-SAS HD to SAS cables maximize speed and port density for adapter cards, servers, and switches. This Mini SAS HD cable is guaranteed to perform at data-rates of 6.0 Gbps per lane and features a SFF-8644 pull to release connector on one end, and a SFF-8470 jack-screw connector on the opposite end. The pull tab connector is compatible with all mini-SAS HD (SFF-8644) ports.

QSFP to CX4/ 4x cables use cutting edge technology to provide an excellent hybrid cable solution for CX4/InfiniBand and QSFP rated switches, network adapters, and storage arrays. These cables have a QSFP connector on one end and a CX4 Connector on the opposite end. Each CX4-QSFP copper cable permits auto-negotiation between the two connected devices for optimal network throughput. Reaching data rates of up 5Gpbs per channel. Compatible with 4x Infiniband SDR/DDR and 10 GbE applications.‌