3.5 Inch Oculink & SATA to M.2/M.3 NVMe SSD Caddy
Oculink to M.2 / M.3 NVMe SSD Drive tray SATA 7+15pin to M.2 SATA interface SSD Drive tray
Built-in SFF-8612(Oculink) Female connector
Built-in M.2 M-key Female connector, pin-out defined by PCIe
Built-in M.2 B-key Female connector
Support SSD_Form_Factor_Version1_a
Supports the following form factor M.2 SSD
Type 2242-D2-B-M: 42mm(L) x 22mm(W)
Type 2260-D2-B-M: 60mm(L) x 22mm(W)
Type 2280-D2-B-M: 80mm(L) x 22mm(W)
Type 22110-D2-B-M: 110mm(L) x 22mm(W)
Oculink to M.2 / M.3 NVMe SSD Drive tray SATA 7+15pin to M.2 SATA interface SSD Drive tray
Oculink is a high-speed data transfer interface designed for use in advanced computer systems. It is a small, low-profile connector that provides up to 16 lanes of PCIe 3.0 or PCIe 4.0 connectivity, along with power and other signals. Oculink is typically used to connect high-performance devices, such as NVMe SSD drives, graphics cards, and network adapters. The Oculink to M.2 / M.3 NVMe SSD Drive tray is a device that allows you to connect an NVMe SSD drive to a computer system that has an Oculink interface. This device consists of a small tray that holds the NVMe SSD drive and a cable that connects the tray to the Oculink interface. The tray is designed to fit either M.2 or M.3 form factor NVMe SSD drives, which are some of the most common types of SSDs used in modern computers. The SATA 7+15pin to M.2 SATA interface SSD Drive tray is another type of device that allows you to connect an SSD drive to a computer system. This device consists of a small tray that holds the SSD drive and a cable that connects the tray to the computer's SATA interface. The tray is designed to fit M.2 form factor SSD drives, which are also common in modern computers. It is important to note that these two devices are not interchangeable. The Oculink to M.2 / M.3 NVMe SSD Drive tray is specifically designed for use with NVMe SSD drives and the Oculink interface, while the SATA 7+15pin to M.2 SATA interface SSD Drive tray is designed for use with SATA interface and M.2 form factor SSD drives.
| SKU | OCU-1667-M |
|---|---|
| Bar Code (UPC) | 646791004348 |
| Specifications | Oculink to M.2 / M.3 NVMe SSD Drive tray SATA 7+15pin to M.2 SATA interface SSD Drive tray
|
We are proud to offer an everyday volume discount program. Simply enter the Promo Code: VOLUME in the Cart to receive the following savings.
Save when you spend:
- Spend $300.00+, save 5% on your order
- Spend $500 or more and save 10% on your order
- Enjoy Free Shipping on all domestic US orders over $100
- Discounts will be applied with entry of Promo Code "VOLUME" in the Discount Codes section of the shopping cart
- Discounts may not be used with other promotions
- Discounts are based on order subtotals (before tax & shipping)
- Discounts are on the current total order amount only