Cables

PCIe Gen 4 16 GT/s OCulink(SFF-8611) to U.3 (SFF-8639) Cable 

1. Standard: PCIe Gen 4 16 GT/s OCulink

2. Interface: SFF-8611 to U.3 (SFF-8639)

3. Cable Length: 50cm

• 20 AWG - 28 AWG high-quality copper wire for reliable data transmission

‌Oculink Right Angle SFF-8611 Host to 4 SATA Target

The Oculink Right Angle SFF-8611 cable is designed to connect a host device to up to four SATA targets.

The Oculink connector on the host end of the cable offers a high-speed, low-latency connection to SATA devices.

‌Oculink to U.2 (SFF-8639) Cable 

PCIe Gen 4 16 GT/s OCulink (SFF-8611) to U.2 (SFF-8639) Cable 

Unit can be used with Micro SATA Cables Part#OCU-1690-GEN4

PCIE GEN4 X4 Slot to Oculink Passive Adapter

Unit can be used with Micro SATA Cables Part# U2-1858-GEN4

PCIe Gen4 U.2(SFF-8639) to M.2 NVMe Adapter

Unit can be used with Micro SATA Cables Part#OCU-1710-U2

PCIe Gen 3 / 4 Lane to Oculink SFF-8612 Adapter

‌SlimSAS 8i to 2 X Oculink 4i Cable - 0.5 Meter

LP Strait 8i to OCulink 4 - Lane x2-Port Y-Cable - 0.5M

Converts a single OCulink 4-Lane connection into two SlimSAS Strait 8i connections

Y-cable design with two SlimSAS Strait 8i connections

Compatible with solid-state drives (SSDs) and other high-speed storage devices

‌SlimSAS 8i S‌FF-8654 to 2 X Oculink 4i Cable - 60 CM

Cable Length is 60 CM

‌Oculink SFF-8611 host To 4 SATA Target

‌SlimSAS 8i to 2 X Oculink 4i Cable - 1 Meter

OCulink Cable SFF-8611 to SFF-8611 Cable 100 CM

OCULINK X4 (SFF-8611) TO OCULINK X4 (SFF-8611) Cable

Unit can be used with our Micro SATA Cables Part#U2-1956-M2

PCIe Gen4 U.2 (SFF-8639) to M.2 NVMe Adapter

The Oculink Male to Female Cable is a 50 cm (19.68 inches) long cable that connects devices with Oculink connectors. These connectors are compact, high-density connectors commonly used in server and storage systems for high-speed data transfer.

Designed to connect Oculink-enabled devices to motherboards or host systems.

Provides reliable and high-speed data transfer, with a maximum transfer rate of up to 32 Gbps.

Ideal for use in high-performance computing and storage applications.

The Cable OcuLink 8i to 8x SATA – 50CM is a cable designed to connect devices with OcuLink 8i connectors to SATA drives. It enables data transfer between these devices, typically used in storage configurations where multiple SATA drives need to be connected to a controller or motherboard equipped with OcuLink 8i ports. The cable is 50 centimeters in length, providing flexibility in setup and ensuring reliable connectivity between components.

OCuLink 8i to 8x SATA – 50CM‌