The SlimSAS 4i PCIe 4.0 M.2 NVMe SSD Adapter is a high-performance storage solution that offers fast transfer speeds and low latency. The adapter supports PCIe 4.0 speeds, which provide a maximum bandwidth of up to 64 Gbps, and is compatible with a wide range of M.2 NVMe SSDs, including 2230, 2242, 2260, and 2280 form factors. The SlimSAS 4i connector is designed to provide a reliable and secure connection, ensuring that your data is transferred quickly and without errors. The adapter also supports advanced features such as TRIM and SMART, allowing you to monitor the health and performance of your NVMe SSD. The SlimSAS 4i PCIe 4.0 M.2 NVMe SSD Adapter is easy to install and comes with all the necessary hardware and software, making it an ideal choice for anyone looking to upgrade their storage solution.
M.2 NVMe to SlimSAS 4i(SFF-8654) convert • Built-in SFF-8654 connector, pin-out defined by SFF-9402 Rev1.1 • Built-in PCIe 2x3 Auxiliary Power Connector for 12V, 6.5A MAX.curerent input • 12V to 3.3V PWM synchronous buck converter Power for M.2 NVMe SSD • 5.5A maximum output current • Output Discharge Control • The output overcurrent protection (OCP) • Undervoltage lock out protection (UVLO) monitor • Over/Under Voltage Protection • Thermal shutdown protection • ESD HBM (Human Body Mode)/500V • Built-in 3.3V Hot swap Power controller with programmable Inrush Slew rate, support a maximun continuous current of 6.5A for M.2 SSD protection • Built-in 3.3V input with 400W TVS (TRANSIENT VOLTAGE SUPPRESSOR) ESD protection • Built-in 3.3V output with 30-V, N channel NexFET power MOSFET protection • Built-in 3.3V output with SCHOTTKY BARRIER Power Rectifier • Supports 3.3V&1.8V power rail for sideband signals • Supports M.2 VIO_CFG Signal • Supports M.2 PERST# Signal 3.3V and 1.8V voltage level shift • Supports M.2 CLKREQ# Signal 3.3V and 1.8V voltage level shift • Supports M.2 WAKE# Signal 3.3V and 1.8V voltage level shift • Supports PWRDIS Signal from SlimSAS 4i(SFF-8654) to M.2 pin out • Supports M.2 /1.8V to SlimSAS 4i /3.3V SMBus Hot Swap, Level Shift • Supports M.2 /1.8V to SlimSAS 4i /3.3V SMBus isolated, repeater. • Built-in SMBus EEPROM 64KB • LED1 RED Blinking indicates M.2 active • LED2 Green ON indicates 3.3V Power Ready • LED4 Green OFF indicates PERST# Normal (Function intentionally inverted • Compliant with NVM Express 1.3a • Support PCI Express Base Specification Rev 4.0 • Compliant with PCI Express M.2 Specification Version 1.2 • Compliant with SFF-8654 Rev 1.2 Supports the following form factor M.2(NGFF) SSD: • Type 2242-D2-B-M: 42mm(L) x 22mm(W) • Type 2260-D2-B-M: 60mm(L) x 22mm(W) • Type 2280-D2-B-M: 80mm(L) x 22mm(W) • Type 22110-D2-B-M: 110mm(L) x 22mm(W)
