‌PCIE X8 WITH REDRIVER TO GEN-Z 1C(EDSFF) DUAL-PORT

‌‌PCIE X8 WITH REDRIVER TO GEN-Z 1C(EDSFF) DUAL-PORT

Features : 

• PCIe x8 can be bifurcated to Gen-Z 1C (EDSFF) dual port 

• Built- in EDSFF 1C with latch connector

• Built- in PCIe ReDriver to extend PCIe Gen4, 16GT/s differential pair signals

• Built- in 100MHz Clock buffer to drive longer trace lengths and longer cable 

• Built- in SMBus Switch with Reset Function(Address: 0xE2)

• Built- in SMBUS I/O Expander(Fixed Address: 0x41)

• Built- in PERST# Bus Buffer with Open-Drain output to be used over longer trace lengths and over longer cable

• Built- in WAKE# Bus Buffer with Open-Drain output to be used over longer trace lengths and over longer cable

• Built- in CLKREQ# Bus Buffer with Open-Drain output to be used over longer trace lengths and longer over cable

• Built- in PWRBRK# Bus Buffer with Open-Drain output to be used over longer trace lengths and longer over cable

Specifications :

• PCI Express Base Specification Rev 4.0 

• PCIe_CEM_SPEC_R4_V1_0_08072019_NCB

• Support SSD_Form_Factor_Version1_a

• Compliant with SFF-TA-1002 Specification Version 1.3

• Compliant with SFF-TA-1006 Specification Version 1.4

• Compliant with SFF-TA-1009 Specification Version 3.0

• Compliant with SFF-TA-1020 Specification Version 1.0

Supports the following form factor EDSFF 1C(Gen-Z) 1C SSD :

• EDSFF 1C(Gen-Z) E1.S 5.9mm Height

• EDSFF 1C(Gen-Z) E1.S 9.5mm Height

• EDSFF 1C(Gen-Z) E1.S 15mm Height

• EDSFF 1C(Gen-Z) E1.S 25mm Height

Operating System Support :

• Windows 7

• Windows 8 &8.1

• Windows 10

• UEFI 2.3.1 or later