Intel NUC 7th Gen Dual Antenna RF Extension LID

One end has a MHF4 connector, and the other end has a RP-SMA female connector with a bulkhead-mount. Cable is 8 inches in length. RP-SMA Female connector includes a bulkhead nut and washer. The length of the RP-SMA-female connector (threaded part) is 3/8 inches.

RP-SMA is a round screw-type connector, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz: This antenna cable is compliant for all types of wireless antennas, including WiFi WiMax networks: 802.11N, AC, G, A, B. 900MHz, 2.4GHz 5GHz applications, as well as any other frequency between 0 and 18GHz.

RP-SMA Female connector composition

• Center Contact: Beryllium Copper, Gold Plated
• Connector Body: Brass, Gold Plated
• Crimp Ferrule: Copper, Nickel Plated
• Insulators: PTFE

Specifications

• 1.13mm Mini-coaxial (50 Ohm)
• 1.2mm low profile, MHF4 IPEX/IPX connector
• SMT type coaxial receptacle and Mating plug cable connector
• Applicable cable: 0.81mm RF coaxial cable
• Easy cable termination by “i-Fit” without soldering
• Application Technology: IEEE802.11 a/b/g/n, WiMax, Zigbee, Bluetooth Wireless
• Space Economy: 2.0mm x 2.0mm PCB footprint, mated height of 1.2 mm
• Teflon Cables: Silver plated center conductor, Teflon dielectric and jacket
• Dual Band Antenna Omni Directional with RP-SMA Male connector with right angle articulating angle that can be adjusted to 90-degrees
• Suitable for 802.11abgn and 802.11ac
• Mounts directly onto RP-SMA-female connector of device.
• Frequencies:◦2.4GHz ~ 2.5GHz / 4.9GHz ~ 5.8GHz
• Gain: 2dBi
• V.S.W.R: Less than ≤2.2:1
• Impedance: 50 ohms
• Dimensions: 57 x 16.5 x 8mm
• Lead-free and ROHS compliant

GORITE PN # GR-LID-400