EDSFF E1.S NVMe SSD to M.2 M-key Card with 3.5 Bracket

EDSFF E1.S: EDSFF stands for Enterprise & Datacenter Storage Form Factor. E1.S is a specific size of the EDSFF form factor, with dimensions of 114.6mm x 30.5mm. NVMe: NVMe stands for Non-Volatile Memory Express. It is a protocol used to communicate with solid-state drives (SSDs) that are connected through a PCI Express (PCIe) bus. NVMe allows for higher performance and lower latency compared to older storage protocols like SATA. SSD: SSD stands for Solid State Drive. It is a type of data storage device that uses NAND-based flash memory to store data. SSDs are faster and more reliable than traditional hard disk drives (HDDs) because they have no moving parts. M.2: M.2 is a form factor for SSDs and other expansion cards. It uses a small, thin card that plugs into a slot on the motherboard. M.2 supports multiple interfaces, including SATA and PCIe, and can be used for both storage and wireless connectivity. M-key: M-key is a type of M.2 connector that supports both SATA and PCIe interfaces. M-key SSDs have a longer key notch on the connector, which allows them to use more PCIe lanes for higher performance. 3.5 bracket: A 3.5 bracket is a mounting bracket that allows a smaller device, like an M.2 SSD, to be installed in a larger 3.5-inch drive bay. The bracket typically includes screws or other hardware for attaching the smaller device to the bracket, as well as mounting holes or other hardware for securing the bracket to the drive bay.

Micro SATA Cables PN # EDSFF-2010-BRKT