U.3 (SFF-8639) PCIe Gen 4 16GT/s to M.2 NVMe SSD Adapter

U.3 (SFF-8639) PCIe Gen4,16GT/s to M.2 NVMe SSD Adapter

With wake# and CLKREQ# signals, they are from M.2 to U.2

The adapter supports SMBus Hot plug, repeater buffer, voltage level shift and isolated input and output SMBUS signals with 64K SMBUS

EEPROM.

Features :

• M.2 NVMe to U.3(SFF-8639) convert
• Built-in SFF-8639, 30u” connector, pin-out defined by SFF-9402 Rev1.1
• PWM 12V to 3.3V synchronous buck converter Power for M.2 NVMe SSD

• • 5.5A maximum output current
  • Output Discharge Control
  • The output overcurrent protection(OCP)
  • Uundervoltage lock out protection(UVLO) monitor
  • Over/Under Voltage Protection
  • Thermal shutdown protection
  • ESD HBM (Human Body Mode)/500V

• Built-in 3.3V Hot Plug Power with eFuse protection for M.2 NVMe SSD

• • Programmable Current Limit: 6.5A
  • Programmable Inrush Current Slew Rate
  • Thermal shutdown protection and fault alert
  • Back-to-Back (B2B) FET Operation

• LED1 RED Blinking indicates M.2 active status
• LED2 GREEN ON indicates 3.3V power ready
• LED3 GREEN ON indicates 1.8V power read

Specifications :

• Compliant with NVM Express 1.3a
• Support PCI Express Base Specification Rev 4.0
• Support SSD_Form_Factor_Version1_a
• Compliant with PCI Express M.2 Specification Version 1.2
• Compliant with PCIe SFF-8639 Module Specification Rev 3.0
• Compliant with SFF-TA-1001 Rev1.1

Supports the following form factor M.2(NGFF) SSD:

• Type 2242-D2-B-M: 42mm(L) x 22mm(W)
• Type 2260-D2-B-M: 60mm(L) x 22mm(W)
• Type 2280-D2-B-M: 80mm(L) x 22mm(W)

Micro SATA Cables PN # U3-1694-M2

Unit can be used with Micro SATA Cables Part#OCU-1690-GEN4

PCIE GEN4 X4 Slot to Oculink Passive Adapter

Unit can be used with Micro SATA Cables PN # OCU-1735-U3

PCIe Gen 4 OCulink (SFF-8611) to U.3 (SFF-8639) Cable 150cm